Planet Technology ADU-2120 User Manual

USB ADSL Modem ADU-2120 User’s Manual

6 2. Please specify the path which ADSL modem connected your computer to Internet, then click OK. Please select the directory with ADU-2120 drive

7 2. Choose the “Search for a suitable driver for my device (recommended)”, and click Next. 3. Next you will be prompted for software drivers.

8 4. Insert the ADSL Driver CD into your systems CD-ROM drive and then click “Browse” to find out the driver location to install. (Assume "E

9 6. The “Digital Signature Not Found” window will pop-up, Click Yes. 7. Please then go to Section “Driver Configuration” for further configura

10 2. Insert the ADSL Driver CD into your systems CD-ROM drive, select “Include this location in the search” and then click “Browse” to find out t

11 3. The Hardware Installation window appears. Click Continue Anyway. 4. Now please go to Step 3 for driver configuration. Driver Configuratio

12 3. On this page, you need to select the operation mode (RFC 1483, PPPoA or PPPoE) and input the VPI / VCI values per your ISP’s requirement.

13 4. Please then select the framing type your ISP uses: LLC or VCMUX/NULL. 5. If you select RFC 1483, you will then need to specified if i

14 6. The system will then ask you to reboot your PC. Please select “Yes, I want to restart my computer now” and click OK to finish this setup pro

15 8. The Hardware Installation page is shown. Please select “Continue Anyway” or Windows XP and “OK” on Windows 2000 3. The Found New Hardwar

Copyright Copyright (C) 2004 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed prod

16 ADSL LAN Configuration To configure the connection, after you have installed the appropriate driver: Step 1. Click either the desktop icon, or

17 Chapter 4. User Interface ACCESSING CSA The User Interface to the ADSL Modem is provided by the Control and Status Application (CSA). You can a

18 Modem Performance The Modem Performance displays performance information. The primary purpose is to display the instantaneous throughput rate f

19 tion: • ADSL link connected • ADSL link disconnected Device Status The Device Status field changes to indicate the status of the modem connectio

20 Chapter 5. Uninstall Modem USB Modem uninstallation USB MODEM To uninstall the software and hardware for the USB ASDL Modem, perform the follo

21 Chapter 6. Troubleshooting If your internet connection is not working, the following hints may be helpful. After trying these hints, if you sti

22 Chapter 7. Abbreviations AAL ATM Adaptation Layer. A function performed during ATM cell processing to adapt traditional IP or Ethernet traffic

Revision User’s Manual for PLANET USB ADSL Modem Model: ADU-2120A / ADU-2120B Rev: 1.0 (JAN. 2004) Part No.: EM-ADU2120

TABLE OF CONTENTS CHAPTER 1 INTRODUCTION...1 FEATURES ...

1 Chapter 1 Introduction PLANET USB ADSL modem ADU-2120 is designed to provide cost-effective ac-cess to high-speed ADSL services. With our ADSL m

2 System Requirement l Mainboard with USB support l Pentium II CPU and above or compatible l RAM: 64M or above l Windows 98SE, Windows 2000, Windows

3 Chapter 2 Installation Please refer to the following steps to complete ADU-2120 installation. Hardware Installation 1. Turn on your PC 2. Inser

4 3. Choose “Specify a location”. Then click “Browse” to find out the driver location to install. (Assume "E" is your CD-ROM drive, the

5 4. The Add New Hardware Wizard will appear and indicate the PLANET ADU-2120 USB ADSL modem has been recognized and will install a new driver. C