Planet Technology 170S8FS User Manual

67Chapter 3 IDENTIFYING FRONT PANELThis section identies all the major components of the front panel. The front panel is shown, followe

89

89Chapter 4 CONFIGURING THE SYSTEMThis chapter provides network managers and system administrators with information about how to congure the

10114.1.3 Management Setting Through Terminal EmulatorThere are three items in the Main Menu, System Function, Conguration and SNMP Cong

1011There are four items in the Conguration menu, “General Conguration, System Conguration, Media Converter Chassis and Media Converters.

12134.1.3.2.3 Media Converter ChassisThe screen will show out the power status of the WMC-1600R.V stands for “yes” and X stands for “No”.Plug in: indi

1213DeviceLLCF: Link Loss Carry Forward, “on” or “off”.Enable: to enable the link of the Device, “on” or “off”.Media 1LLR: Link Loss Return, “on” or “

14154.1.3.3 SNMP CongurationGet Community Name: to get the device community name (default = public).Set Community Name: to set the device community n

14154.2 Management through Web browserThe WMC-1600R is accessible using a Web browser (IE explorer, Netscape Communications, etc.) to open up the chas

16174.2.1 System FunctionThere are four items in System Function menu, “Software Reboot, Factory Reset, Image Update and Conguration Update. 4.2.1.1

TrademarksCopyright  PLANET Technology Corp. 2002.Contents subject to revision without prior notice.PLANET is a registered trademark of PLANET Techno

1617System Name: to authorize the device system name.Location: to show the WMC-1600R where it is located.Refresh time: to set the refreshing time of t

1819Warm Start trap: to set the trap when the device had been reset (default = enable).Authentication Fail Trap: to set the warning trap when

18194.2.2.5 Redundant Backup SettingThe redundant function is to change the master line to the slave line in case of the linking fails happen.The Redu

2021

2021Chapter 5 TECHNICAL SPECIFICATIONSChassis SystemCapacity Sixteen bays for housing up to sixteen media convertersMaterial SteelPower One power supp

22Management ModuleStandardsIEEE802.3 10Base-T EthernetIEEE802.3u 100 Base-TX Fast EthernetIEEE802.3x flow controlProtocol CSMA/CDData Transfer RateEt

22Part No.:EM-WMCv1

1Table of ContentsChapter 1 INTRODUCTION 11.1 Briefing 11.2 Features 1Chapter 2 UNPACKING AND INSTALL 32.1 Unpacking

1Chapter 1Introduction1.1 BriengThe Intelligent Media Converter Chassis WMC-1600R series provides 16-slot and one management system in the

23

23Chapter 2 UNPACKING AND INSTALLThis chapter provides unpacking and setup information for the Media Converter Chassis.2.1 UnpackingOpen the box of

452.3.1 Mounted to 19-inch standard rackUse the rack-mount brackets and screws to install the chassis into any EIA 19" standard rack.Step 1: At

45Step 3: Carefully slide in the module and fasten the hand screw clockwise by using hand or screwdriver until it is fully and rmly 

672.3.4 Installing and Removing the Power SupplyTo remove a power supply out the chassis, you have to loose the hand screw counter clockwise and pull