Planet Technology 802.11g User Manual

802.11g Wireless USB Adapter WL-U356L User Manual Version: 1.0 Date: November 2007 1

5. Choose the “Install the software automatically” and click “Next”. 6. Click “Finish” to complete the driver installation 6

2.2 Configuration Utility & Driver Installation in Vista OS 1. Insert the bundled CD into the CD-ROM drive to launch the auto run program. Onc

4. Insert WL-U356L into a vacant USB port of your PC. Windows will detect this device automatically. When the “Found New Hardware Wizard” dialog b

6. Choose the “Browse my computer for driver software (advanced)”, tick the box of “include this location in the search:”. Click “Browse” to locat

7. Choose the “Install this driver software anyway”. 8. Click “Close” to complete the driver installation 10

11

Chapter 3 Configuration Utility The Configuration Utility is a powerful application that helps you configure the WL-U356L and monitor the link statu

This screen contains current link information of WL-U356L. Status: Shows the BSSID associated with, which can be used to identify the wireless netw

3.2 Configuration In this screen, you can configure the wireless settings of WL-U356L. After configuration, please press ”Apply” to save settings o

steady-state demodulation and synchronization of bit clock and frame start. Two different preambles and headers are defined: the mandatory supported

Copyright Copyright © 2007 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed,

¾ Auto: With this setting, stations can communicate with the Access Point either with or without data encryption. It will detect the AP that it con

WPA-PSK and WPA2-PSK is a special mode of WPA for home users without an enterprise authentication server and provides the same strong encryption p

You can configure profile with those buttons: ¾ Add: Add a new profile. ¾ Remove: Delete the profile you selected. ¾ Properties: Modify the profi

Chapter 4 Troubleshooting 1. The PLANET WL-U356L does not work properly. a. Reinsert the PLANET WL-U356L into your PC’s . b. Right click on My Comp

20g. If Security is enabled, make sure that the correct encryption keys are entered on both the Adapter and the access point.

IIexposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation. R&TTE Compliance Statement T

TABLE OF CONTENTS Chapter 1 Introduction... 1 1.1 Features...

PLANET WL-U356L User Manual 1 Chapter 1 Introduction Complying with the IEEE802.11b/g standard,

Transmit Power 15dBm typically @ 802.11b 13dBm typically @ 802.11g Sensitivity 54Mbps: Typical -68dBm @ 10% PER 11Mbps: Typical -83dBm @ 8% PER LED

that the number of walls or ceilings residing between Access Points and clients is minimized. Building materials make a difference – A solid metal d

Chapter 2 Installation Procedure 2.1 Configuration Utility & Driver Installation in XP OS The following installation operates under Window XP.

4. Insert WL-U356L into a vacant USB port of your PC. Windows will detect this device automatically. When the “Found New Hardware Wizard” dialog