Mobile IP Roaming Gateway MAP-2105 User’s Manual 1
[Configuration -> Local Service -> Mobile IP] Enable Transparent Mobile IP Service: checked Mobile IP Community Name: PLANET (it must be identi
Mobile IP Community Name: PLANET (it must be identical for all nodes in the same mesh network) Mobile Location Register Address: 10.16.1.7 (the IP add
CN Info Two correspondent nodes connected with relevant info. Client Info Info of the mobile station recorded in the MAP-2105. 7
Chapter 3 Web Configuration To start the web configuration, 1. Start the web browser 2. Enter https://IP Address of the MAP-2105, in the address bo
6. After login successfully, the Web-based configuration main page is open, which is appealed as below. The following table describes the navigatio
contains the configuration to updates password for web management server SNMP contains the configuration for Simple Network Management Protocol
System Settings contains the following: Device Name Enter a name for the device. Device Location Enter a location that the device is located. Con
Display the IP address of the WAN interface of this device. For the first time operation, it display IP obtained from DHCP server. “Apply” Button Sub
-- Static IP selected Please enter the required field as follow: IP Enter an IP address for this device Netmask Enter a network mask for this IP Ap
Secondary DNS Server IP Address Specify the IP address of the Secondary DNS server for this device. Leave blank when DHCPC is enabled, otherwise this
Copyright Copyright (C) 2006 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed prod
Static Routing Entry contains the following parameters: Subnet Enter a subnet IP address. Netmask Enter a netmask of the subnet IP address abov
3.3 Local Service 3.3.1 MLRD Mobile Location Register contains the following parameters: Enable Mobile Location Register Service Enable or disable m
3.3.2 VPN Client VPN contains the following parameters: Status Display the status of the VPN client. Enable PPTP client Enable or disable PPTP c
Enter the username which is pre-defined in VPN server of MESH Gateway. Password Enter the password which is pre-defined in VPN server of MESH Gat
Server 2 Enter IP address or hostname for the NTP server. Server 3 Enter IP address or hostname for the NTP server. Timezone Click on the dro
SNMP contains the following parameters: SNMP version Select from v1 v2, v3, or both. SNMPv2 Read only community Enter the v2 read only communit
Read/Write community Enter the v2 read write community. SNMPv3 Read only username Enter the v3 read only username. Read/Write username Enter t
Enable or disable SNMP trap for this device. Trap Community Enter the trap server community. Destination Enter the IP address of the trap server
Press this button to restore default configuration for this page. 3.5 Tools 3.5.1 Ping Ping contains the following parameters: Ping Enter an I
3.5.2 Download Download contains the following parameters: Release Version Display the revision number of the firmware. TFTP Information Server
Trademarks The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and software products by their trade
“Apply” button Press this button to save new settings and begin TFTP operation. 3.5.3 Firmware Update Firmware page contains the following paramet
3.5.4 Settings 26
Settings contain the following parameters: Save Config Click on the “mlrd.cfg” hyperlink to save the current configuration into local computer. This
Press this button to save new settings. “Use Default” button Press this button to restore the factory default configuration for this page. 3.6 Reboo
3.8.1 System System contains the following parameters: Uptime Display the uptime of the device since last booting. Hardware Display the state o
Display information about the memory state of the device. Firmware Display the revision version of the firmware. 3.8.2 Interfaces Interfaces c
Interface Display the state of the interface. Running means the interface is up and running. Hardware Address Display the hardware address of the
3.8.3 Services Services page will display the status of each process and a corresponding “Restart” button to restart that particular service. 3.8.4 M
CN Info Display the information of connected Correspondent Node. Client Info Display the information of client register to the MAP-2105. 3.8.5 Ro
3.8.6 Syslog Syslog contains the following parameters: “Refresh” button Press this button to refresh the content of Output area. Output Displa
TABLE OF CONTENTS Chapter 1 Introduction ...1 1.1 Features ...
Chapter 4 Management Utility The PLANET MLRD Management Suite is a Java-based software application designed specifically to manage the MAP-2105 which
2. Choose Install Folder – Select the desired directory to locate the software application. 3. Choose Shortcut Folder – Set the shortcut path. 36
4. Pre-Installation Summary – A review of the installation settings before starting the installation. 5. Installing – Display the progress of the
6. Install Complete – Indicate the installation has been completed. After complete the steps, you can start up the MLRD Management Suite from the s
1. Introduction – About the uninstaller. The un-installation will be started once the Uninstall button is hit. 2. Uninstalling – The un-installatio
The status bar located at the bottom of the AP Finder is displaying the status of the scanning process. While the –Select Adapter- drop down list, a
In order to start listen to the alarms, hit on the Start button. The foreground of the Start button will turn to green color when the trap viewer i
the Output File Name text box in the Settings column and press the Set button. Besides, choose Settings > Output Filename from the menu bar would
The upcoming section is going to describe regarding the configuration of the MAP-2105 via MLRD Manager. 43
4.3 Node Configuration using MLRD Manager The MLRD Manager is a Java-based graphical interface application that allow user to perform configuration o
4.3.2 Status > System...45 4.3.3 Status > MLRD ...
This read-only field shows the IP Address of the current MAP-2105. SNMP Version The Version of SNMP using to read and write data from/to the node. Tw
Status The node operation mode, which can be Online or Offline Contact Name A generic name of the network administrator. Contact Email A gener
4.3.4 Config > System System panel is used to configure the System settings such as the administrator name and contact information, as mentioned
4.3.5 Config > Network > WAN This panel consists of two parts: the upper part allow user to select the WAN Interface type to use and the lower p
Primary DNS Server IP Address Specify the IP Address of the primary DNS Server for this device Secondary DNS Server IP Address Specify the IP Add
Status Display the status of the DHCP-Client type. This field is read-only and will be disabled if the Static WAN IP is selected. Click on the Enabl
4.3.6 Config > Network > Route This section describes about the parameters for the Route table. Enable Route Table Check this checkbox to e
This table consists of seven columns: Subnet Specifies the Subnet IP Address of the route Netmask Specifies the Netmask corresponding to the Sub
4.3.7 Config > Management > SNMP Password This panel is basically separate to three different sections. The upper panel is used to change or re
Pass Phrase The middle panel is to configure the Access control of the SNMP. Click the Set Access Config button to load the settings. The parameter
Chapter 1 Introduction The MAP-2105 is a mobile IP roaming gateway which is specifically designed for PLANET wireless mesh network. It offers the full
Community Specifies the secret password refer to the SNMP Trap. Enable Trap Authentication Check the checkbox to enable the sending of trap when
4.3.9 Config > Management > Remote Syslog This submenu is used to set the remote syslog server IP Address, who is receiving the syslog message
Server 1, Server 2, Server 3 The network will connect to the NTP server 1, while Server 2 and 3 are used as back up servers. Time Zone Choose the
Select the type of MLR. The available choices are Primary and Secondary. Select Primary if this server is the main MLRD, and secondary if it is config
VPN Server Enter the IP Address of the VPN Server Remote Network Subnet The Subnet IP Address of the Remote Network Remote Network Netmask The N
4.3.13 Commnad > Download/Upload The MAP-2105 also provides the download and upload file feature. The following section describes the parameters o
Time to Reboot Specifies the time to delay before the reboot take place, in seconds. Click the Reboot button to execute the command. 4.3.15 Comm
The MAP-2105 should connect to the network that provide DHCP services (the first time installation) In this guide, we will base on XRT-401D (Internet
https://192.168.0.100. 6. The pop-up screen will ask for user name and password. By default, please key in “admin” for both name and password. Then b
Chapter 2 Basic Network Setup This chapter describes a basic network environment formed by three mesh AP and one MAP-2105. The administrators can add
Comments to this Manuals