Planet Technology ADE-3000 User Manual

Networking&Communication ADSL Bridge Router ADE-3000 User’s Manual

ADE-3000 User Manual 6 Chapter 3 Login And System Status This Chapter details the first time login procedure and the Status screen Login ADE-3000 cont

Login And System Status 7 Figure 3-1: Logon Window If you can't connect If ADE does not respond, check the following: · Machine is properly i

ADE-3000 User Manual 8 Status Home Once you login in ADE-3000, its Home page will appear. It shows the firmware versions and WAN and LAN interface sta

Login And System Status 9 LAN The LAN page shows the information and status of LAN port, DHCP client table, linking status of Ethernet and USB interf

10 Chapter 4 System Configuration This Chapter details the configurations for ADE-3000 Overview This chapter describes the setup procedure for: · WA

System Configuration 11 Figure 4-2: Per VC Settings To switch between the PVCs, please choose the options of virtual circuit and click on the Submi

ADE-3000 User Manual 12 Figure 4-5: Encapsulation types of Bridge mode Step 2 Click “submit” to commit modifications you’ve done, then click “Save C

System Configuration 13 PPPoE, PPPoA Connection for WAN (Routing mode) If PPPoE (Point-to-Point Over Ethernet) or PPPoA (Point-to Point Over ATM) is p

ADE-3000 User Manual 14 Figure 4-8: PPP setting Screen Step 3 Click on “NAT” tab on left panel, and enable the NAPT function in the option menu. Step

System Configuration 15 Figure 4-9: Fixed IP set-up screen Step 2 Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/ Route

ii Copyright (C) 2002 PLANET Technology Corp. All rights reserved. The products and programs described in this User ’s Manual are licensed products

ADE-3000 User Manual 16 Figure 4-10: DHCP client enable Step 3 Click on “NAT” tab on left panel, and enable the NAPT function in the option menu. St

System Configuration 17 requirement and case: On CO side, there must be at least one IGMP querier (router) present. IGMP querier •will send IGMP query

ADE-3000 User Manual 18 Note: Encapsulation is based on the ISP configuration. It may be different for different ISPs and countries.

System Configuration 19 LAN Configuration The LAN IP and Subnet Mask of ADE-3000 are the values seen by the users on their internal network. The defa

ADE-3000 User Manual 20 Figure 4-14: DHCP server settings • Ethernet Mode Setting: By clicking this link, you will be directed to Ethernet Mode pag

System Configuration 21 Figure 4-16: NAT configuration Enter the session name you want to use for NAT. Select VC number, which is assigned to the ses

ADE-3000 User Manual 22 NAT NAT option only maps single WAN IP address to the local PC IP address. This is peer-to-peer mapping (1 on 1). For each PVC

System Configuration 23 Figure 4-19: Enter Session name and User’s IP After all these settings are done, click “Submit” button, the record will be ad

ADE-3000 User Manual 24 This function is generally used to set up a web server, ftp server, or e-mail server on your network. Figure shows the screen

System Configuration 25 and click Add. Then all incoming WAN and LAN Ethernet packets matched with this source MAC address will be filtered out. If th

i TABLE OF CONTENTS CHAPTER 1 INTRODUCTION...1 ADE-3000 Features..

ADE-3000 User Manual 26 Figure 4-23: DNS Configuration Screen Note: Before the DNS proxy mode is enabled; please go to the Miscellaneous Configuratio

System Configuration 27 Chapter 5 PC Configuration This Chapter details the PC Configuration required on the local ("Internal") LAN. Overvie

ADE-3000 User Manual 28 Windows 9x/ME 1. Select Control Panel - Network. You should see a screen like the following: Figure 5-1: Network Configuratio

System Configuration 29 Figure 5-3: Gateway Tab (Win 95/98) · On the DNS Configuration tab, ensure Enable DNS is selected. If the DNS Server Search

ADE-3000 User Manual 30 Figure 5-5: Network Configuration (Win 2000) 3. Select the TCP/IP protocol for your network card. 4. Click on the Properties

System Configuration 31 Figure 5-6: TCP/IP Properties (Win 2000) 5. Ensure your TCP/IP settings are correct: Using DHCP To use DHCP, select the radio

ADE-3000 User Manual 32 Windows XP 1. Select Control Panel - Network Connection. 2. Right click the Local Area Connection and choose Properties. You s

System Configuration 33 Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows settings. Rest

ADE-3000 User Manual 34 Macintosh Clients From your Macintosh, you can access the Internet via ADE-3000. The procedure is as follows. 1. Open the TCP/

35 Chapter 6 Admin Privilege This Chapter details the operation of ADE-3000 and the status screens. The links under Admin Privilege are only to be ac

ii Linux Clients...34 CHAPTER 6 ADMIN PRIVILEGE.

ADE-3000 User Manual 36 Figure 6-2: ATM Status Screen PPP Status The PPP Status page shows the status of PPP for each PVC. Connect and Disconnect a

Admin Privilege 37 TCP Status The TCP Status page shows the statistics for all TCP connections. This is for internal network only. Figure 6-4: T

ADE-3000 User Manual 38 Learned MAC Table The Learned MAC Table page shows the current learned Bridge MAC table. The Aging Timeout is for determining

Admin Privilege 39 Figure 6-7: ADSL Configuration Screen RIP Configuration RIP Configuration allows users to setup RIPv1/v2 support and related

ADE-3000 User Manual 40 Figure 6-8: RIP Configuration Screen Password Configuration The Password Configuration page allows users to set the passw

Admin Privilege 41 Miscellaneous Configuration The Miscellaneous Configuration allows users to set all the miscellaneous configurations in ADE-3000.

ADE-3000 User Manual 42 The HTTP server port can be changed to other secure port number. For example, when it is changed to 1001, the HTTP server addr

Admin Privilege 43 Reset to Factory Default The Reset to Factory Default page allows you to reset the modem to original factory default configuratio

ADE-3000 User Manual 44 System Log Users may acquire information of the system from this screen, including the time, and connection process related me

45 Appendix A Troubleshooting This Appendix covers the most likely problems and their solutions. Overview This chapter covers some common problems th

1 Chapter 1 Introduction This Chapter provides an overview of ADE-3000's features and capabilities. Congratulations on the purchase of ADE-3000.

ADE-3000 User Manual 46 I reconnect it? Answer 2 You have to go to the PPP Status under Admin Privileged column, choose the correct PVC and Connect op

47 Appendix B Specifications ADE-3000 Model ADE-3000 Dimensions 175 mm (W) * 130 mm (D) * 32 mm (H) Operating Temperature 0° C to 40° C Storage Tem

ADE-3000 User Manual 48 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device m

ADE-3000 User Manual 2 Advanced Functions · Virtual Servers. This feature allows Internet users to access Internet servers on your LAN. The required

Introduction 3 Physical Details Front Panel The front panel of ADE-3000 has 2 LEDs for one LAN port and one ADSL port. Figure 2 displays a front pane

4 Chapter 2 Installation This Chapter covers the physical installation of ADE-3000. System Requirements Computer · PC or TCP/IP compliant workstati

Login And System Status 5 If required, use a standard LAN cable to connect the "Uplink" port to a standard port on another hub. Step 3 Conn