VoIP Analog Telephone Adapter VIP-156/VIP156PE/VIP-157/VIP-157S User’s manual Version 3.1 1
Left / Right Panel of VIP-157S LED Display & Button 1 PC RJ-45 connector, to maintain the existing network structure, connected direct
LED display of VIP-156 / VIP-156PE LED Indicators Descriptions PWR Power is supplied to the device. STATUS The Status LED will be flashing when the m
2Chapter 2 Preparations & Installation Physical Installation Requirement This chapter illustrates basic installation of ATA analog Phone Adapter (
LAN IP address configuration via web configuration interface Execute your web browser, and insert the IP address (default: 192.168.0.1) of VIP in the
14Client #112xxx*xxx*xxx*xxx# Setup Static IP Address Use the * (star) key when entering a decimal point. DHCP will be disabled and system will c
15address of the ATA. #125# Check Primary DNS Server Setting IVR will announce the current setting in the Primary DNS field. #126# Check LAN IP A
Port Port #147+Number# enable forward to FXO Port Eanble forward to FXO Port #116# Enable PPTP function None Enable PPTP function #117# Disable PPT
17Chapter 3 Network Service Configurations 3Configuring and monitoring your ATA from web browser The ATA integrates a web-based graphical user interf
VoIP Phone Adatper main page 18
Chapter 4 VoIP Telephone Adapter Configurations Phone Book ATA can set up 140 records of Phone Book. User can dial the Name records to make calls via
Copyright Copyright (C) 2008 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed pro
If you need to add a phone number into the Phone Book list, you need to input the position, the name, and the phone number (by URL type). When you fi
speed dial number you choose. Busy Forward: If you are on the phone, the new incoming call will forward to the number you choosed. You can input the n
Call Forward function for VIP-157 SNTP settings This page defines the primary and second SNTP Server IP Address, to get the date/time information.
Volume Settings for VIP-154T/VIP-154PT Beside the above settings, VIP-157 also can set the volume of PSTN. PSTN-Out Volume is to set the PSTN volume
Auto Answer (For VIP-157) This page defines the Auto Answer function. You can set the Auto Answer function to answer the incoming call by the phone
Dial Plan Settings This page defines the Dial Plan Setting function. This function is when you input the phone number by the keypad but you don’t n
26the max length is 40. - Symbol: It only accept the [+], [x] - +: It means as “or”. For example, [123+456+334+5xx] even if [123 or 456 or 334 or 5
Example_4: Dial Now: *xx+#xx+11x+xxxxxx 1. If the dialing number is match with the rule of “*xx”, it will send out the dialing number directly. For
waiting notice in your current call. If you set the function to Off, then you will not hear any notice. T.38 (FAX) Settings This page defines the
the specific number automatically. Use Hot Line: Click Enable to carry the Hot line function out. Hot line number: The hot line number, it can input t
3Revision User’s Manual for PLANET VoIP Analog Telephone Adapter: Model: ATA Rev: 3.1 (2008, February) Part No. EM-VIP_ATAV3.1
- Fixed IP: It could setup the IP address manual. - DHCP Client: It will acquire the IP address automatically. - PPPoE: It will use the PPPoE conne
DHCP Server: It will allot the IP address automatically when enabke this function. Start IP: Start IP of lease table End IP: End IP of lease table. Ne
VLAN Settings This page defines the VLAN setting in this page. This function needs to co-operate with network devices which have VLAN function. VLA
DMZ Settings This page defines the DMZ setting in this page. DMZ: If setup as On, all of packets (expect SIP packets) will send to the specific I
External Port: For corresponding the external port. Server IP: To input the Server IP address. PPTP Settings This page defines the PPTP setting in
Service Domain Settings In Service Domain Function you need to input the account and the related informations in this page, please refer to your ISP p
For example: The default is realm 1, input the 2* (Follow by the # key) from keypad and hang up the telephone set. It will switch to realm 2, and it c
Codec ID Setting This page defines the Codec ID. Sometimes 2 VoIP devices with different Codec ID will cause the interopability issue. If you are t
DTMF Setting This page defines the RFC2833 Out-Band DTMF, Inband DTMF and Send DTMF SIP Info in this page. To change this setting, please following
Other Settings This page defines the Hold by RFC, Voice/SIP QoS and other settings in this page. To change these settings please following your ISP in
4 TABLE OF CONTENTS Chapter 1...
Auto Configuration This page defines the Auto Configuration (Auto Provision) setting. ATA supports TFTP, FTP, HTTP and IP PBX auto configuration fu
PTT Settings for VIP-156/VIP-157S Beside the above settings, VIP-157 also can set country of FXO port. PTT Settings for VIP-157 Cancel without t
MAC address for PPPoE dial-up connection. Please refer to the following operate procedures for more understandings to carry out the MAC Clone functi
5. After Save&Reboot, the MAC of LAN port will become to PC’s original MAC address. Tone Settings This page defines the Tone settings. This fun
(The Registration Server also need support this function) CPC Delay: When receive the disconnect signal, machine will to cut the voltage down to 0V af
Save & Reboot In Save & Reboot you can save the changes you have done. If you want to use new setting in the Phone Adapter, You have to click
Auto Upgrade The device can update new firmware with the gz or ds file format automatically by the Auto Upgrade function. Field Descriptions Update
firmware. - Power On (+ Scheduling): The machine will check the new firmware when power on and following the scheduling date and time. - Scheduling:
Appendix A Voice Communication Samples There are several ways to make calls to desired destination in ATA. In this section, we’ll lead you step by st
5Codec ID Setting ...37
Case 2: (Peer-to-Peer mode) VIP-157S Port 1 to Port 2 communications Supposing one VIP-157S connects to two telephones, just pick up phone 1 and dial
Case 3: Voice communication via SIP proxy server – SIP-50 Registration / Registration / 51 ATA A IP Address: 192.168.0.1 Line Number: 100
52STEP 3: Repeat the same configuration steps on ATA B, and check the machine registration status, make sure the registrations are completed. Test
Case 4: Voice communication via IP PBX system – IPX-2000 (Auto-config) In the following sample, we’ll introduce how to integrate the ATA with our IP P
STEP 2: Please browse to the Device Æ IP Phone menu and create new device. And press the EDIT button for set up the Auto Config configuration. STEP
STEP 5: After setting up the parameters, please browse to the Service Æ IP PBX service menu, and press RELOAD of IP PBX configuration reload selecti
STEP 7: After enabling the auto-config feature, the ATA shall be able to obtain IP address and SIP extension information from IP PBX system IPX-2000
Case 5: Call Forward Feature_Example 1 In the following samples, we’ll introduce the Call Forward Feature applications. In this example, there are t
58Test the scenario: 1. VIP-156_C pick up the telephone 2. Dial the number 1001(VIP-156_A), 3. Because VIP-156_A had set up All Forward functi
Case 6: Call Forward Feature_Example 2 In this example, there are one VIP-157 and two VIP-156 register to IPX-300. The VIP-157_A had set Call Forward
6Chapter 1 1Introduction Overview Based on years of VoIP manufacturing experiences, PLANET Technology VoIP total solutions are known for advanced i
Test the scenario: 1. VIP-156_C pick up the telephone 2. Dial the number 1001(VIP-157_A) 3. Because VIP-157_A had set up All Forward function t
Case 7: Call Forward Feature_Example 3 In this example, there are one VIP-157 and two VIP-156 register to IPX-300. The VIP-157_A had set Call Forward
Test the scenario: 1. PSTN Phone Number 11112222 pick up the telephone 2. Dial the PSTN Phone Number 33334444(VIP-157_A) 3. Because VIP-157_A h
Case 8: Call Forward Feature_Example 4 In this example, there are three VIP-156 and connect with Peer to Peer mode. VIP-156_A had set Call Forward fun
Case 9: Auto Answer Feature_IP to PSTN In this example, there are one VIP-157 and two VIP-156 and connect with Peer to Peer mode. The VIP-157_A had se
the Auto Answer config menu. In the setting page, please enable the Auto Answer and PIN Code Enabled function, then the sample configuration screen is
Case 10: Auto Answer Feature_PSTN to IP In this example, there are one VIP-157 and two VIP-156 and connect with Peer to Peer mode. The VIP-157_A had s
Test the scenario: 1. The Phone Number 11112222 pick up the telephone 2. Dial the PSTN Phone Number 33334444(VIP-157_A) 3. VIP-157_A will ring
68Appendix B The method of operation guide In this section, we’ll introduce the features method of operation, and lead you step by step to establish
69the switch code. Realm switch code: 1*: Realm 1 2*: Realm 2 3*: Realm 3 For example: The default is realm 1, input the 2* (Follow by the #
• Voice processing: Voice Active Detection, DTMF detection/ generation, G.168 echo cancellation (16mSec.), Comfort noise generation (CNG) • In band,
70Appendix C VIP-156/VIP-156PE/VIP-157/VIP-157S Specifications Product SIP Analog Telephone Adapter Model VIP-156 VIP-156PE VIP-157 VIP-157S Hardwa
EC Declaration of Conformity For the following equipment: *Type of Product : SIP Telephone Adapter *Model Number : VIP-156 * Produced by: M
Left / Right Panel of VIP-156 Front Panel of VIP-156PE Left / Right Panel of VIP-156PE 8
Front Panel of VIP-157 Left / Right Panel of VIP-157 Front Panel of VIP-157S 9
Comments to this Manuals