Planet Technology WDAP-2000PE User Manual download pdf (Page 53)

show snmp statistics

Description: Display the current SNMP statistics.

show trap manager [<string up to 30 characters>]

Description: Display the settings of the specified SNMP trap manager. If no trap manager is

specified, this command displays the settings of all trap managers.

(4) Diagnostics Commands

disable log <facility>

Description: Disable the log function on the specified facility.

disable syslogd

Description: Disable the remote log function.

disable trace <facility>

Description: Disable the trace function on the specified facility.

enable log <facility> [<log level, 1-7>]

Description: Enable the log function with the specified log level on the specified facility. If no log

level is specified, the previously configured log level is used.

enable syslogd

Description: Enable the remote log function.

enable trace <facility> [<log level, 1-7>]

Description: Enable the trace function with the specified log level on the specified facility. If no

log level is specified, the previously configured log level is used.

set log level <log level, 1-7>

Description: Set the log level.

set syslogd <IP address>

Description: Configure the IP address of the remote syslog daemon. This is used for the remote

syslog function.

show log level

Description: Display the current log level.

show log table [<facility>]

Description: Display the current logged events of the specified facility. If no facility is specified,

this command displays all logged events.

show syslogd

Description: Display the current configuration of the remote log function.

(5) Security Commands

add radius server {primary | secondary}

Description: Configure the primary/secondary RADIUS server settings. This is a multi-line

command, and you have to enter the IP address and port number of the server, shared secret,

and enable/ disable.

change password

Description: Change the password for management, including HTTP and TELNET.

disable radius mac authentication

Description: Disable the use of external RADIUS servers for MAC address access control.

disable radius server {primary | secondary}

Description: Disable the use of the primary/secondary RADIUS server.

enable radius mac authentication

Description: Enable the use of external RADIUS servers for MAC address access control.

enable radius server {primary | secondary}

Description: Enable the use of the primary/secondary RADIUS server.

set radius server reattempt <reattempt interval in minutes, 5-60>

Description: Configure the reattempt time for the system to contact the primary RADIUS server

after the primary RADIUS server was down.

set radius server retry <retry interval in times, 1-5>

Description: Configure the number of retries after which the system may think the RADIUS

server is down.

show radius server [{primary | secondary}]

Description: Display the configuration of the specified RADIUS server. If no server is specified,

this command displays the configurations of all RADIUS servers.

1 2 ... 48 49 50 51 52 53

Comments to this Manuals

No comments

Planet Technology WDAP-2000PE User Manual Page 53

Comments to this Manuals

Related products and manuals for WLAN access points Planet Technology WDAP-2000PE