Planet Technology WRT-414 User Manual download pdf (Page 49)

After press Add or Edit button in QoS screen, you will see the web screen below for user to setup their

QoS rule.

Parameters Description

Rule Name Please give a name to the QoS Rule

Bandwidth You can limit the maximum bandwidth consumed by this rule by selecting

“Maximum”. You also can reserve enough bandwidth for this rule by

selecting “Guarantee”. The unit of bandwidth is Kbps. When we download

data from Internet, the unit of download screen shows is KBps. 1KBps is

equal to 8Kbps. When you enter the bandwidth, please make sure the

number you enter is correct. For example, if you want to limit users

download speed to 50KBps from Internet, you will need to enter 400Kbps in

the configuration.

Local IP Address Please enter the IP address of the local PC.

Local Port Range Please enter the port range.

Remote IP Address Please enter the IP address of the PC from remote site.

Remote Port Range Please enter the port range.

Traffic Type Select the traffic type of the packets that this rule will apply to. We list some

popular applications here to ease the configuration. You also can get the

same result by using other parameters, for example source or destination

port number, if you are familiar with the application protocol.

Protocol Please select the protocol TCP or UDP in the list.

After configuration complete, please click “Save” to save the settings. Or you may press “Reset” to clear

the settings to enter again.

5.6 NAT

- 43 -

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 92 93

No comments

Planet Technology WRT-414 User Manual Page 49