Planet Technology ADW-4100 User Manual

ADSL Wireless Modem Router With 4-port Switch ADW-4100 User’s Manual

5 Chapter 2 Installation This Chapter covers the physical installation of ADW-4100. System Requirements • PC or TCP/IP compliant workstations • 32

ADW-4100 User Manual 6 Connect the supplied power adapter to ADW-4100 and power up. Use only the power adapter provided. Using a different one may ca

Login And System Status 7 Chapter 3 Login And System Status This Chapter details the first time login procedure and the Status screen Login ADW-4100 c

ADW-4100 User Manual 8 Figure 3-1: Logon Window If you can't connect If ADW does not respond, check the following: • Machine is properly inst

Login And System Status 9 Status Home Once you login in ADW-4100, its Home page will appear. It shows the firmware versions and WAN and LAN interface

ADW-4100 User Manual 10 LAN The LAN page shows the information and status of LAN port, DHCP client table, and linking status of Ethernet interface.

11 Chapter 4 System Configuration This Chapter details the configurations for ADW-4100 Overview This chapter describes the setup procedure for: • WA

ADW-4100 User Manual 12 Figure 4-2: Per VC Settings To switch between the PVCs, please choose the options of virtual circuit and click on the Submi

System Configuration 13 Figure 4-5: Encapsulation types of Bridge mode Step 2 Click “submit” to commit modifications you’ve done, then click “Save C

ADW-4100 User Manual 14 be obtained from ISP. And VCI/VPI values must be obtained from them as well, for some local ISPs don’t offer this information

ii Copyright Copyright (C) 2003 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed

System Configuration 15 connection handshake. The default value is 1432. Authentication When AUTO option is chosen, the PAP mode will run first then C

ADW-4100 User Manual 16 Fixed IP for WAN If your ISP has assigned static IP address, you may connect to the Internet by using a fixed, or static addre

System Configuration 17 Figure 4-10: DHCP client enable Step 3 Click on “NAT” tab on left panel, and enable the NAPT function in the option menu. Ste

ADW-4100 User Manual 18 Special purpose multicast packet (such as RIP 2 packet) should run without •interference. Table 4-1 IGMP packets process No

System Configuration 19 Table 4-2 WAN configurations Overview Bridge Mode (Dynamic IP) Router Mode (Dynamic IP) Router Mode (Static IP) Configuration

ADW-4100 User Manual 20 LAN Configuration The LAN IP and Subnet Mask of ADW-4100 are the values seen by the users on their internal network. The defa

System Configuration 21 Figure 4-14: DHCP server settings • Ethernet Mode Setting: By clicking this link, you will be directed to Ethernet Mode pag

ADW-4100 User Manual 22 Figure 4-16: PPP Configuration Ÿ Session Name This field allows the user to enter his/her own session Name to distinguish dif

System Configuration 23 PPP Configuration Status will be displayed at the bottom of this page to show all the Session Names with its Adapter (PVC numb

ADW-4100 User Manual 24 more than one local PC can be associated with one WAN Interface. Click the Session Name Configuration link to add the session

iii Trademarks The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and software products by their

System Configuration 25 Figure 4-19: NAT Session Name Configuration Ÿ Session Name This field allows the user to enter his/her own session Name to d

ADW-4100 User Manual 26 requests of your network, ADW-4100 will forward those requests to the appropriate computer. (Note: DHCP function must be disab

System Configuration 27 DNS Configuration The DNS Configuration page allows you to set the configuration of DNS proxy. ADW-4100 supports the DNS proxy

ADW-4100 User Manual 28 packets will be forwarded to the destination PC. Destination MAC When the bridge filtering is enabled, enter the Destination M

System Configuration 29 The value of channel can be selected from channel 1 to 11 for FCC domain, chan-nels 1 to 13 for ETSI domain and 1 to 14 for Ja

ADW-4100 User Manual 30 Chapter 5 PC Configuration This Chapter details the PC Configuration required on the local ("Internal") LAN. Overvie

System Configuration 31 Windows 9x/ME 1. Select Control Panel - Network. You should see a screen like the following: Figure 5-1: Network Configuratio

ADW-4100 User Manual 32 Figure 5-3: Gateway Tab (Win 95/98) • On the DNS Configuration tab, ensure Enable DNS is selected. If the DNS Server Search

System Configuration 33 Figure 5-5: Network Configuration (Win 2000) 3. Select the TCP/IP protocol for your network card. 4. Click on the Properties

ADW-4100 User Manual 34 Figure 5-6: TCP/IP Properties (Win 2000) 5. Ensure your TCP/IP settings are correct: Using DHCP To use DHCP, select the radio

i TABLE OF CONTENTS CHAPTER 1 INTRODUCTION...1 ADW-4100 Features...

System Configuration 35 Windows XP 1. Select Control Panel - Network Connection. 2. Right click the Local Area Connection and choose Properties. You s

ADW-4100 User Manual 36 Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows settings. Rest

System Configuration 37 Macintosh Clients From your Macintosh, you can access the Internet via ADW-4100. The procedure is as follows. 1. Open the TCP/

38 Chapter 6 Admin Privilege This Chapter details the operation of ADW-4100 and the status screens. The links under Admin Privilege are only to be ac

Admin Privilege 39 Figure 6-2: ATM Status Screen TCP Status The TCP Status page shows the statistics for all TCP connections. This is for internal

ADW-4100 User Manual 40 Route Table The Route Table page displays routing table and allows you to manually enter the routing entry. The interface br0

Admin Privilege 41 System Default Gateway Configuration The system-wide Default Gateway now provides three options: Auto, User-selected Network Int

ADW-4100 User Manual 42 ADSL Configuration The ADSL Configuration page allows you to set the configuration for ADSL proto-cols. Trellis Trellis Code.

Admin Privilege 43 This field allows the user to Enable or Disable the RIP session. The resulting RIP session will monitor all network interfaces th

ADW-4100 User Manual 44 • V2 MC: The supplier transmits in RIPv2 Multicast. Listener This field allows the user to select the Listener Mode (RIP Rec

ii Learned MAC Table...41 ADSL Configuration...

Admin Privilege 45 Figure 6-9: Miscellaneous Configuration Screen WAN side HTTP server When it is enabled, the Web setting pages of ADW-4100 can

ADW-4100 User Manual 46 When it is enabled, the FTP connection can be established from both the LAN and WAN sides. TFTP server When it is enabled, it

Admin Privilege 47 nect: Some ISPs would terminate the PPP session due to the inactivity. For the PPP connect on WAN access, the PPP will be automat

ADW-4100 User Manual 48 Code Image Update The Code Image Update page allows you to upgrade the image code locally. Browse the location of firmware fil

49 Appendix A Troubleshooting This Appendix covers the most likely problems and their solutions. Overview This chapter covers some common problems th

ADW-4100 User Manual 50 Question 2 If the PPP is disconnected after the Disconnect Timeout and how can I reconnect it? Answer 2 You have to go to the

51 Appendix B Specifications ADW-4100A/ADW-4100B Product ADSL Wireless Modem Router Model ADW-4100A ADW-4100B Annex A Annex B ADSL Standards Full-

1 Chapter 1 Introduction This Chapter provides an overview of ADW-4100's features and ca-pabilities. Congratulations on the purchase of ADW-4100

ADW-4100 User Manual 2 w DMZ. One (1) PC on your local LAN can be configured to allow unrestricted 2-way communication with Servers or individual use

Introduction 3 Physical Details Front Panel 12LAN34WANADSLACTPWRWLANADSL Wireless Modem RouterADW-4100 Figure 1-2: Front Panel LED definitions LEDs

ADW-4100 User Manual 4 Restore Default IP Address and Clear Password If ADW-4100's IP Address or password is lost, the following procedure can be