Planet Technology FST-802 User Manual

User's Manual FST-801 FST-802 FST-802S15/802S35/802S50 FST-806A20/806B20 10/100Base-TX to 100Base-FX Smart Media Converter

- 10 - 3. MANAGE THE MEDIA CONVERTER This product provides two different managed methods – configure through its DIP Switch or install into the ce

- 11 - 3.2 Managed Media Converter module through MC-1600MR/R48 Chassis The Web Smart Media Coverter Chassis that can control FST-80X through the

- 12 -

- 13 - 4. LINK PASS THROUGH FUNCTION The LFP function includes the Link Fault Pass Through function (LLCF/LLR) and the DIP Switch design. LLCF/LLR

- 14 - 4.2 Link Loss Return (LLR) The fiber ports of FST-80X have been designed with an LLR function for troubleshooting a remote connection. LLR w

- 15 - 5. TROUBLESHOOTING This chapter contains information to help you solve issues. If the FST-80x is not functioning properly, make sure the FST

- 16 - APPENDIX A NETWORKING CONNECTION A.1 Switch‘s RJ-45 Pin Assignments 10/100Mbps, 10/100Base-TX RJ-45 Connector pin assignment Contact MDI Me

- 17 - A.3 Cable Connection Parameter The limitations are shown as below; Duplex Connection Limitation (max.) Twisted Pair Half / Full Node to N

- 2 - Trademarks Copyright © PLANET Technology Corp. 2007. Contents subject to revision without prior notice. PLANET is a registered trademark of P

- 3 - TABLE OF CONTENTS 1. INTRODUCTION...

- 4 - 1. INTRODUCTION 1.1 Checklist Thank you for purchasing PLANET 10/100Base-TX to 100Base-FX Smart Media Converter, the 10/100Base-TX to 100Bas

- 5 - 1.4 Specification Model FST-801 FST-802 FST-802S15 FST-802S35 FST-802S50 FST-806A20 FST-806B20 Hardware Specification Standards IEEE

- 6 - 1.5 Product Outlook Right View: there is one RJ-45 twisted-Pair jack (Auto-MDI/MDI-X), one fiber-optic connector (vary by model) and six

- 7 - 2. HARDWARE INSTALLATION This product provides two different running speeds – 10/100Base-TX and 100Base-FX in the same device and the 10/10

- 8 - 2.2 Slide Media Converter module into MC-1600MR/R48 Chassis installation Step 1- Unscrew and pull out the FST-80x Media Converter board. Ste

- 9 - 2.3 Real Ethernet environment application Standalone and centralize management Media Converter installation Afford the current network grows