2 Bay SATA NAS RAID Server NAS-7201 Quick Installation Guide Version 1.0
5.2. HDD Formation and RAID Setting For new attached hard disk, you should format the HDD before any setting. 1. Go to『Maintenance』Æ『RAID Setting
Table of Contents 1. OVERVIEW... 3 2
1. Overview Thank you for purchasing NAS-7201, the 2-bay SATA RAID NAS server, this guide provides physical installation and initial HDD configu
3. Hardware Installation Step 1: Remove the Front Case Follow the figure below to release the screws and open the front case with the direction. Sl
Step 3: Slide in the HDDs HDD1 HDD2 Gently slide in the SATA HDD one by one as the figure. When HDD touch the SATA connector, slightly p
Step 4. Lock the HDD To lock the HDD through two screws so that the HDD can well connected to the NAS server. Step 5 Slide back the side case
Step 6 Lock the front case Follow the figure below to put back the front case. Be careful for the LED wires. Please align the LED wires to the
4. Hardware Connection o np Steps Description 1 Connect NAS-7201 and a Switch, Hub, Router, or computer with RJ-45 Ethernet cable. 2 Connect US
5. Basic Configuration 5.1. Web configuration access The NAS-7201 provides GUI (Web based, Graphical User Interface) for management and ad-minist
Comments to this Manuals