PLANET Technology Corp. GRT-101/401/402 User’s Manual G.SHDSL Bridge/Router GRT-101/GRT-401/GRT-402 User’s Manual - - 1
PLANET Technology Corp. GRT-101/401/402 User’s Manual Table 2-2 GRT-401/GRT-402 LED Functions LEDs Active Color Description PWR On Green Power
PLANET Technology Corp. GRT-101/401/402 User’s Manual The STU-R is a standalone and can able to place in desktop. All the external wiring shall be
PLANET Technology Corp. GRT-101/401/402 User’s Manual 2.4 Setting up the hardware environment Step 1: Connect the power adapter to the port labele
PLANET Technology Corp. GRT-101/401/402 User’s Manual Chapter 3 Configuration 3.1 Purpose This chapter provides information about configuring GRT s
PLANET Technology Corp. GRT-101/401/402 User’s Manual admin> show system If firmware file is downloaded from our local distributor or FTP server
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.3 Web operation and Quick Installation Guide 3.3.1 Bridge Mode - - 10
PLANET Technology Corp. GRT-101/401/402 User’s Manual Web UI Configuration After connection via web browser, click BRIDGE and CPE Side to setup Br
PLANET Technology Corp. GRT-101/401/402 User’s Manual Console Configuration Do the following steps: 1 User : admin « password: admin « 2 enable «
PLANET Technology Corp. GRT-101/401/402 User’s Manual 1. Enter LAN IP: 192.168.0.1 2. Enter LAN Sub-net Mask: 255.255.255.0 3. Host Nam
PLANET Technology Corp. GRT-101/401/402 User’s Manual 11. Enter WAN1 VPI: 0 and VCI: 32. 12. Select WAN1 AAL5 Encap: LLC 13. Select: PPPoA +
PLANET Technology Corp. GRT-101/401/402 User’s Manual Copyright Copyright (C) 2007 PLANET Technology Corp. All rights reserved. The products and
PLANET Technology Corp. GRT-101/401/402 User’s Manual 18. The screen will prompt the new configured parameters. Check the parameters and click
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.3.3 Routing Mode for IPoA or EoA Web UI Configuration For Route Mode with Classical IP ove
PLANET Technology Corp. GRT-101/401/402 User’s Manual 6. Enter DHCP Client Start IP: 192.168.0.2 7. Enter DHCP Client End IP: 192.168.0.51 8. Enter
PLANET Technology Corp. GRT-101/401/402 User’s Manual 19. The screen will prompt the new configured parameters. Check the parameters and click R
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.3.4 LAN-to-LAN Connection with Bridge Mode Web UI Configuration STU-R (CO) side Click set
PLANET Technology Corp. GRT-101/401/402 User’s Manual 7. Setup the CO Router in bridge mode (refer to bridge mode in section 2.1). The gateway of
PLANET Technology Corp. GRT-101/401/402 User’s Manual STU-C (CPE) side Follow the above instruction. The only difference in this configuration is t
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.3.5 Advanced Setup Advanced configuration contains SHDSL, WAN, Bridge, Route, NAT/DMZ and
PLANET Technology Corp. GRT-101/401/402 User’s Manual these parameters in WAN configuration menu. The WAN Number 1 will be the parameters setup in
PLANET Technology Corp. GRT-101/401/402 User’s Manual Press Restart to restart GRT series working with new parameters or press continue to setup an
PLANET Technology Corp. GRT-101/401/402 User’s Manual Table of Contents Table of Contents...
PLANET Technology Corp. GRT-101/401/402 User’s Manual With Dynamic Routing, you can enable GRT series to automatically adjust to physical changes i
PLANET Technology Corp. GRT-101/401/402 User’s Manual RIP Mode: this parameter determines how the product handle RIP (Routing information protocol)
PLANET Technology Corp. GRT-101/401/402 User’s Manual NAT/DMZ NAT (Network Address Translation) is the translation of an Internet Protocol address
PLANET Technology Corp. GRT-101/401/402 User’s Manual addresses (eg: 192.168.0.10 ~ 192.168.0.50) collectively use two of the global IP addresses (
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.3.6 Administration This session introduces security and simple network management protocol
PLANET Technology Corp. GRT-101/401/402 User’s Manual SNMP Simple Network Management Protocol (SNMP) is the protocol not only governing network man
PLANET Technology Corp. GRT-101/401/402 User’s Manual access right. After configuring the community pool, press OK. Click Modify to modify the
PLANET Technology Corp. GRT-101/401/402 User’s Manual the Internet. SNTP can be used when the ultimate performance of the full NTP implementation.
PLANET Technology Corp. GRT-101/401/402 User’s Manual Upgrade You can upgrade the gateway using the upgrade function. Press Upgrade. Browse the f
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.4 Command Line Interface For serial console and Telnet management, GRT series implements tw
PLANET Technology Corp. GRT-101/401/402 User’s Manual STU-C (CPE) side...
PLANET Technology Corp. GRT-101/401/402 User’s Manual interfaces have on-line help information. To get on-line help, type “?” for CLI mode or press
PLANET Technology Corp. GRT-101/401/402 User’s Manual interface. Note: See section 3.14 User Profile for more information on how to add, delete, mo
PLANET Technology Corp. GRT-101/401/402 User’s Manual - - 37
PLANET Technology Corp. GRT-101/401/402 User’s Manual - - 38
PLANET Technology Corp. GRT-101/401/402 User’s Manual - - 39
PLANET Technology Corp. GRT-101/401/402 User’s Manual To start machine configuration, please move the cursor “ >>” to enable and press ente
PLANET Technology Corp. GRT-101/401/402 User’s Manual reboot Reset and boot system ping Packet internet groper command admin Setup mana
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.4.7 Reboot To reboot GRT series, use reboot c
PLANET Technology Corp. GRT-101/401/402 User’s Manual profile table however users who have the supervisor password can change the configuration of
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.5.5 SNTP Time synchronization is an essential element for any business that relies on an I
PLANET Technology Corp. GRT-101/401/402 User’s Manual - - 53.8.4 Bridge ...
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.8 Setup All of the setup parameters are located in the subdirectories of setup. Move the
PLANET Technology Corp. GRT-101/401/402 User’s Manual 4-wire product can be worked under 2-wire mode. You can setup the data rate by the multiple
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.8.4 Bridge You can setup the bridge parameters in bridge command. If the product is configu
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.8.8 DHCP >> generic Configure generi
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.9 Connection Mode GRT series supports two connection modes: bridging and routing. Currentl
PLANET Technology Corp. GRT-101/401/402 User’s Manual set up GRT series for bridging management with IP = 192.168.0.1, subnet mask = 255.255.255.0,
PLANET Technology Corp. GRT-101/401/402 User’s Manual LAN 1(Forward) WAN 1( Filter) WAN 2( Filter) WAN 3( Filter) WAN 4( Filter)
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.11.2 Static routing table In order to pass data through a network and onto the Internet or
PLANET Technology Corp. GRT-101/401/402 User’s Manual admin# write 3.11.3 NAT/PAT NAT can be used to share an Internet connection, to reduce the re
PLANET Technology Corp. GRT-101/401/402 User’s Manual possible when the number of hosts having concurrent requests to the external network is equal
PLANET Technology Corp. GRT-101/401/402 User’s Manual Chapter 1 Overview Based on digital subscriber line (DSL) technology, PLANET’s G.SHDSL produc
PLANET Technology Corp. GRT-101/401/402 User’s Manual To show the configuration, use the list command: admin# setup ip_share nat fixed list Note: T
PLANET Technology Corp. GRT-101/401/402 User’s Manual admin# write 3.11.4 DHCP server The DHCP server application automatically assigns IP addresse
PLANET Technology Corp. GRT-101/401/402 User’s Manual addresses of real DNS servers: admin# setup dns_proxy 168.95.1.1 168.95.192.1 140.92.61.55 No
PLANET Technology Corp. GRT-101/401/402 User’s Manual Only GRT-402 support 4 wire phone line to connect, it also allow to assign link type by actua
PLANET Technology Corp. GRT-101/401/402 User’s Manual LLC header of the packet. The VC based multiplexing method carries each protocol on a separat
PLANET Technology Corp. GRT-101/401/402 User’s Manual WAN 6 Disable WAN 7 Disable WAN 8 Disable To save the new WAN port configuration, enter: a
PLANET Technology Corp. GRT-101/401/402 User’s Manual WAN 8 Disable To save the new WAN port configuration, enter: admin# write 3.12.4 WAN IP ad
PLANET Technology Corp. GRT-101/401/402 User’s Manual If your local ISP uses protocols of “PPPoA” or “PPPoE” over the ATM VC, you may need to setup
PLANET Technology Corp. GRT-101/401/402 User’s Manual PPPoA/PPPoE protocols must work with NAT/PAT. Please refer to section 3.11.3 NAT/PAT for deta
PLANET Technology Corp. GRT-101/401/402 User’s Manual ----- --------------- --------------- --- ----- ------ -------- ------ WAN1 192.168. 1. 1
PLANET Technology Corp. GRT-101/401/402 User’s Manual I.610 OAM F5 loopback PPP Support PPP (RFC 1661) PPP over AAL5 (RFC 2364) PPP over Ethernet (
PLANET Technology Corp. GRT-101/401/402 User’s Manual Note: You must perform the above procedure in the sequence as shown. To show all user profile
PLANET Technology Corp. GRT-101/401/402 User’s Manual Configuration generic parameter Telnet listening TCP port : 47 To save your
PLANET Technology Corp. GRT-101/401/402 User’s Manual Note: GRT series comes pre-configured without any constraint on the legal access IP addresses
PLANET Technology Corp. GRT-101/401/402 User’s Manual 3.16.2 SNMP trap GRT series can generate alarm conditions to SNMP manager via SNMP traps. The
PLANET Technology Corp. GRT-101/401/402 User’s Manual setup mode Route setup shdsl mode STU-R setup shdsl n*64 0 setup shdsl type Annex_A setup shd
PLANET Technology Corp. GRT-101/401/402 User’s Manual Watch the system messages to ensure every command was accepted by the system successfully. No
PLANET Technology Corp. GRT-101/401/402 User’s Manual - - 71 Download Byte Transferred : 624641 bytes Complete Transfer Complete, Repl
PLANET Technology Corp. GRT-101/401/402 User’s Manual Hardware Specification WAN/LAN Ports RJ-11 SHDSL WAN port x1 10/100Mbps LAN port x1 on GRT-1
PLANET Technology Corp. GRT-101/401/402 User’s Manual Chapter 2 Installation 2.1 Front Panel LEDs The LEDs on the front panel indicate the operatio
Comments to this Manuals