4-slot Managed Modular Switch MGSW-004 User’s Manual
6Chapter 3 Console and Telnet Management 3.1 connect To PC by RS-232 cable The RS-232 console port is an interface that directly connects to the PC.
7 3.3 Main Menu The main menu displays all the sub-menus that are available. Striking Enter, at a highlighted option, will confirm the choice of the
8Ø System Name: display and change the system name of this Switch Ø System Location: display and set the location of this Switch Ø System Contact
9 3.3.3 Address Table This menu contains four items for MAC address record on each working port Ø All Ø Module Ø Module Port Ø Quit 3.3.4 Sp
103.3.5 Broadcast Storm Filter This menu contains three items to enable or disable Broadcast Storm Filter: Ø Enable Ø Disable Ø Quit 3.3.6 IGM
11 3.3.8 VLAN for CPU (2 VLANs) This menu contains two items for 2 VLANs for CPU: Ø Current first VLAN for CPU: VLAN ID 1Current second Ø VLAN f
12MGSW-004 3.3.9.3 Secure IP 1,2,3,4 Allow setting 4 Secure IP addresses of 4 PCs 3.3.10 Save Current Settings This menu provide save current settin
13 3.3.13 Quit This menu provide logout the switch
14Chapter 4 WEB MANAGEMENT MGSW-004 support web management therefore in this section will introduce the configuration and functions of the web-based
154.2 Home The homepage is display the configuration of the MGSW-004 System Name An administratively-assigned name of the managed unit System Locatio
2Trademarks Copyright PLANET Technology Corp. 2003. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET T
16 4.5 Statistics (Port Counters) and Statistics 2 (RMON Statistics) The Statistic page displays the detailed information about each port. You can co
174.6 VLAN A VLAN (Virtual LAN) is a group of switch ports designated by the switch as belonging to the same broadcast domain. This feature allows wo
18 You can add, edit and remove port members of each trunk and then press "Apply" button after you have finished configuring the trunks you
19If you want to participate in spanning tree, have the "Enable Spanning Tree Protocol" checkbox selected. The Current Spanning Tree Root
20there is no MAC address count restriction for that port. Ø Type the number in the “ Max Allowed MAC Address Count “ edit for that port. The upper
21 IF this function of a port is enabled, then the most significant 6 bits of the TOS (these 6 bits are also known as the DiffServ Code Point "D
224.13 Static Address In this function, you can lock a certain MAC address (associated with a host) to a certain port. Once a certain MAC address is
23 4.15 Port Mirror If you want to monitor all receive and transmit packets of one port. You can do the following: Ø Choose the monitored port in &
244.16 IP Config You can change the IP address, subnet mask and default gateway of the managed node. (You can also do that from RS232 console). Enter
254.17 SNMP You can manage the Switch using third-party’s SNMP (Simple Network Management Protocol) agent. Access rights to the SNMP agent are contro
3TABLE OF CONTENTS CHAPTER 1 INTRODUCTION...1 1.1 CHEC
26 4.19 Upgrade You can on-line upgrade the firmware of the managed unit. The following steps is needed to upgrade the firmware: Ø Use HTTP or FTP
27Appendix A Technical Specifications Model MGSW-004 Ports 4 module slot RS-232 DB-9 male Dimensions 440mm x 227mm x 67mm Weight 4.6kg Power Requ
28Appendix B Cable Specification 10/100Mbps, 10/100Base-TX Contact MDI MDI-X 1 1 3 2 2 6 3 3 1 6 6 2 Straight-Through Cable Crossover Cable
295 BI_DC- BI_DD- 6 BI_DB- BI_DA- 7 BI_DD+ BI_DC+ 8 BI_DD- BI_DC-
44.9 PORT SECURITY ...19 4.10 PRIORITY – 8
1Chapter 1 Introduction 1.1 Checklist Thank you for purchasing Planet’s MGSW-004 Managed Modular Switches. Before continuing, please check the cont
2 1.3 Product Feature Ø Conforms to IEEE 802.3, 802.3u, 802.3z, 802.3ab and 802.3x standards Ø 4 expansion slots to configure flexible network Ø
3Chapter 2 HARDWARE INSTALLATION This section is describes the hardware features and installation of 4-slot Managed Modular Switch. Before using MG
4Console ports The RS-232 console port is an interface that directly connects to the PC. When the connection between the PC and switch is ready, run
5Desktop installation For desktop installation, make sure the desk is flat and clean. Plug all the network cables and the power cord then the system
Comments to this Manuals